Which is a silent letter in the word “ANSWER”?
What is the specific gravity of the solid, if density of the solid is 19.5 g/cm3?
What is the use of a try square?
Which one is a “Don’t” of discussion etiquette?
Name the property of metal to resist the effect of tensile forces without rupture.
Dimension line is terminated by arrowhead at its ends.
Which is the immediate life saving procedure?
Which one is a brain of computer?
What is called the ratio between the density of a substances density of water at 4°C?
What is the specific gravity of the metal, if the piece of metal weighs 150 grams in air and 125 grams in water?
Re-arrange the following set of words into meaningful sentence – “teacher / school / worked / she / a / as”
What is the block weighs (W) in kg, if volume (V) is 320 cm3 and density 8.9 g/cm3?
Hatch Lines are drawn at 45 degree to the horizontal.
What is the volume (V) of mercury in cm3, if mass (m) of mercury is 1 kg and density (r) is 13.6 g/cm3?
Leader line is used for showing diameter.
Which one is in active voice?
What is the reading of a vernier caliper?
Which alloy steel is used to make permanent magnets?
Flammable of liquifiables solids are classified as.
What is the use of feeler gauge?
Fill in the blank with present progressive tense of the verb — “The train _______ through the tunnel.”
What is the colour code for plastic waste bin?
The word that expresses a sudden and strong feeling is called ______
Read the measurement in the dial caliper
What is the reading of vernier bevel protractor?
What is the volume of mercury in cm3, if the mass (m) of mercury is 136 grams (g) and density (r) of mercury is 13.6 g/cm3?
What is the mass in gram, if a force of 15 dyres acting on a mass m producing an acceleration of 2.5 cm/sec2?
Name the mandatory symbol.
Name the part marked as x.
What is the process of breaking down the materials into organic compounds and can be used as manure?
What is the density (r) in g/cm3 of an iron cube, if it weighs (W) 4.8 kg and volume (V) is 640 cm3?
Final line is drawn usually with HB pencil.
Wha is the mass if the density of a body is 7.6 g/cm3 and its volume is 25 cm3?
Name the part of file marked as x .
Which one is the personal safety?
Which is used for filling narrow grooves and angles above 10°?
Name the part marked as x .
Proportion of an arrowhead length : width is
What will be the effect if the clearance angle of chisel is less than recommended angle while chipping?
Which marking media is poisonous?
A point has no length, no breadth no height but existence or location.
Name the angular measuring instrument.
Visible outlines are drawn as continuous thick line.
When you greet higher officials such as Teacher, Instructor or Supervisor, you should use
What is the specific gravity of the metal, if the weighs 6.5 kgf in air and 3.5 kgf in water?
What is the density of aluminium?
What operation is carried out in a gang drilling machine?
Which one is a “Do’s” of discussion etiquettes?
What is the accuracy of metric outside micrometer?
